Alcatel-Lucent 1850 User Provisioning Manual page 238

Tree area
............................................................................................................................................................................................................................................................
The Create link allows the user to configure a new FFP.
STM PM functional tab
The STM PM functional tab allows the user to retrieve the performance issues for an
STMn port. It contains the following sub-tabs as shown in
PM Report
•
PM Init Register
•
PM Mode
•
Figure 4-27 PM report - STM PM
PM Report tab
The PM Report tab allows the user to retrieve the performance monitoring report for the
selected STM port.
The Retrieve Performance Monitoring panel displays the following parameters:
Access Identifier - Specifies the Access Identifier for the selected port.
•
Monitor level - Specifies at which level the monitoring report is required. The values
•
are DN, DNORCMPL, UP, and UPORNCMPL. The default value is 1-UP.
Location - Specifies the location. The values are NEND, FEND, BIDIR, and ALL.
•
The default value is NEND.
............................................................................................................................................................................................................................................................
4 - 40
Access a module
Figure 4-27.
8DG08763KAAA
Issue 1 February 2009