Alcatel-Lucent 1850 User Provisioning Manual page 242

Tree area
............................................................................................................................................................................................................................................................
Location - Specifies the location. The values are NEND, FEND, BIDIR, or ALL. The
•
default value is NEND.
Direction - Specifies the direction. The values are RCV or ALL. The default value is
•
RCV.
Time Period - Specifies the time interval for the which the report is being generated.
•
The values are 15-MIN, 1-DAY, or BOTH. The default value is BOTH.
The Retrieve link allow the user to recall the performance monitoring mode.
AU select tab
The Administrative Unit Selection tab allows the user to select the corresponding AU for
the selected STMn port as shown in
Figure 4-30 Administrative unit selection
The Administrative Unit Selection panel displays the following parameter:
Access Identifier - Specifies an Access Identifier for the selected STMn port. The AU
•
for STM16 is selected as STM16AU44C or AU4-1-1-4-3-1 or 5.
The Continue link to perform the AU Configuration and connection.
AU List tab
The Administrative Unit List tab displays the Provisioned Administrative UNIT list as
shown in
............................................................................................................................................................................................................................................................
4 - 44
Figure 4-31.
Figure 4-30.
Access a module
8DG08763KAAA
Issue 1 February 2009