Alcatel-Lucent 1850 User Provisioning Manual page 567

Appendix
............................................................................................................................................................................................................................................................
Command
(cont')
RTRV-PM-GBE10
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
Description
Time Period, identifies the
accumulation time period for the
retrieved performance monitoring
information.
Monitor date, specifies the
(starting) date of the PM
collection period for which PM
data is to be reported.
Monitor Time, if TMPER of 15-
MIN, BOTH is entered, specifies
the (starting) time of the PM
collection period for which PM
data is to be retrieved. If TMPER
of 1-DAY is entered, the value of
MONTM is ignored (i.e., an
entered value is validated, but
does not affect the command
execution). The minutes 0-14, 15-
29, 30-44 resp. 45-59 specifies the
first, second, third respective the
fourth 15-minute period within the
specified hour.
Number of 15-minute historical
registers, specifies the number of
previous 15-minute historical PM
registers to retrieve in addition to
that specified by MONDAT and
MONTM.
The register specified with
MONDAT and MONTM will be
the first output followed by the
NUM15MIN previous registers.
Number of 1-day historical
registers, specifies the number of
previous 1-day historical PM
registers to retrieve in addition to
that specified by MONDAT and
MONTM. The register specified
with MONDAT and MONTM will
be the first output followed by the
NUM1DAY previous registers.
Parameter defaults
Parameter Default
TMPER 15-MIN
MONDAT Current date
MONTM Current hour and
beginning of the
current 15-minute
window.
NUM15MIN 0
NUM1DAY 0
6 - 1 7 3