Alcatel-Lucent 1850 User Provisioning Manual page 354

Procedures
............................................................................................................................................................................................................................................................
Parameter
Hop List ID
Current Protection Type
Layer Type
SRLG Diversity
Revert
Pinned
All Affinity Incl
All Affinity Incl
Any Affinity Excl
Working Use
Protection Oper
Primary ID
Instance Priority
Setup Priority
Holding Priority
Actual Hop List
............................................................................................................................................................................................................................................................
5 - 90
Description
Specifies the Path Hoplist Identifier assigned for
the LSP Tunnel routing inside network domains
Specifies the Path protection type assigned by
user in the Control Plane
Specifies the Layer type for the LSP Tunnel. The
values are PSC/TDM/DWDM
Specifies the SRLG diversity requested by user
for the tunnel. The values are ON/OFF
Specifies the revertive protection for path
protected support
Specifies the Tunnel pinned mode support
Specifies the path includes all affinity (resources
color) constrain. It is in the range [1-
4294967295]
Specifies the path includes any affinity
(resources color) constrain. It is in the range [1-
4294967295]
Specifies the path excludes any affinity (resource
color) constrain. It is the range [1-4294967295]
Specifies the Working Tunnel Flag. When set to
YES, this flag indicates that working tunnel
instance is configured for passing normal traffic.
When set to NO, this flag indicates that
associated protecting Tunnel instance configured
for passing normal traffic. The value are
NO/YES
Specifies the Protecting Tunnel Flag. When set
to YES, this flag indicates that protecting Tunnel
instance is actually used for carrying normal
traffic. The values are NO/YES
Specifies the Primary Tunnel identifier. It is the
range [1-4294967295]
Specifies the Tunnel instance restoration or load-
sharing priority
Specifies the Tunnel instance setup priority
Specifies the Tunnel instance holding priority
Specifies the Hoplist index of actual Tunnel
instance path to destination. It is in the range [1-
4294967295]
Modify tunnel
8DG08763KAAA
Issue 1 February 2009