Alcatel-Lucent 1850 User Provisioning Manual page 216

Tree area
............................................................................................................................................................................................................................................................
Resource details
Click one of the item listed under Resource column as shown in
Figure 4-12 OUT-FLOWS resource details
The P-Bridge Outflow panel is displayed with the following parameters:
State - This is the notification about the actual status of the resource; active (the
•
resource is in-service); not active (the resource is out-of-service).
User label - The entry box allows the user to digit a name to describe this resource.
•
The format is <1-30 VALID NAME CHARACTERS>.
Service Type - Refers the upper layer service type.
•
S-VID - Refers the stacked VLAN identifier associated to this OutFlow.
•
The panel has the following hyperlinks:
Cancel - To cancel the changes and return to the previous page.
Save - To apply the previous settings and return to the previous page .
Deactivate - To change the State field only and return to the previous page.
Delete - To delete the current outflow.
In Fiber In band functional tab
Select In Fiber In Band functional tab from the Link Aggregator configuration tab as
shown in
............................................................................................................................................................................................................................................................
4 - 18
Figure 4-13.
LAG configuration
Figure 4-12.
8DG08763KAAA
Issue 1 February 2009