18. Remove the eight hexagonal screws from the
connectors on the rear chassis (lower).
19. Remove the six screws and remove the rear
chassis (lower).
20. Remove the hard disk drive unit.
(Refer to Section 5-31-2.)
n
Be sure to put the removed hard disk drive
unit on the HDD cushion.
21. Disconnect the harnesses and flat cable from
the connectors CN140, CN144, CN151,
CN152, CN154, CN161, and CN162 on the
MB-648 board.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
http://getMANUAL.com
Screws
(BVTT3 x 6)
CN162
CN154
MB-648 board
5-32-9. MB-648 Board
Hexagonal screws
Rear chassis (lower)
Hexagonal screws
Screws (BVTT3 x 6)
CN144
CN161
CN140
Screws
(BVTT3 x 6)
5-211