Sony DNW-A100 Maintenance Manual page 356

5-27. Reel Shift Gear Replacement
Removal
1. RS Table Block Assembly Removal
Remove the RS table block assembly with the
reel table assembly attached.
(Refer to steps 1 through 3 in Section 5-9-1.)
2. Reel Shift Gear Removal
Remove the stop washer, then remove the reel
shift gear.
n
Do not reuse the stop washer.
3. Crank Gear Removal
(1) Remove the stop washer, then remove the
crank gear.
(2) Take out the crank arm from the crank gear.
n
Do not reuse the stop washer.
Installation
4. Crank Gear Installation
(1) Clean shaft A.
(2) Apply one drop of oil to shaft A.
(3) Combine the crank arm with the crank gear.
(4) Pass the crank gear through the shaft A.
(5) Fix the crank gear with a new stop washer.
5-172
Stop washer
Reel shift gear
Warm wheel
Reel Shift Gear Removal
Stop washer
Crank arm
Clank gear
Shaft A (after cleaning, apply a drop of oil.)
Crank Gear Removal/Installation
DNW-A100/A50/A45
DNW-A100P/A50P/A45P