Sony DNW-A100 Maintenance Manual page 302

5-18-1. T Drawer Arm Replacement
3. Slant Guide Removal
Remove the stop washer, then remove the slant
guide and spring from the T drawer arm.
4. Slant Guide Base Removal
Remove the screw, then remove the slant guide
base from the T drawer arm.
5. Drawer Guard removal
Remove the screw, then remove the drawer guard
from the T drawer arm.
Installation
6. Drawer Guard Installation
(1) While pushing the drawer guard in the
direction indicated by the arrow, tighten the
screw.
(2) Apply locking compound to the screw.
7. Slant Guide Base Installation
(1) Move the slant guide base counterclockwise
and tighten the screw.
(2) Apply locking compound to the screw.
8. Slant Guide Installation
(1) Pass the spring through the Slant guide base
while passing it through the slant guide shaft.
(2) Put the spring on the slant guide base.
(3) Fix the slant guide with a new stop washer.
9. T Drawer Arm Installation
(1) Pass the polywasher and spring through the T
drawer base while passing them through the
shaft of the T drawer arm assembly.
(2) Put the spring on the T drawer arm and T
drawer base.
(3) Confirm that specification 1 is satisfied with
the T drawer arm pushed downward.
If specification 1 is not satisfied, perform the
following adjustment. (Height adjustment)
1 Remove the T drawer arm and spring.
2 Adjust the polywasher value at the top of
the T drawer base.
3 Confirm that specification 1 is satisfied.
(4) Pass the polywasher through the shaft and fix
the T drawer arm using a new stop washer.
5-118
Slant guide
Drawer guard
Screw
(B2 x 4)
T Drawer Arm Disassemble/Assemble
Polywasher
(Height adjustment)
Polywasher
(vertical play adjustment)
Stop washer
Spring
Screw (B2 x 4)
Stop washer
Slant guide base
T drawer arm
T drawer arm
Spring
T drawer base
DNW-A100/A50/A45
DNW-A100P/A50P/A45P