Sony DNW-A100 Maintenance Manual page 376

5-31-2. Removal/Installation of Hard Disk Drive
Installation
4. Attach the Hard Disk Drive Unit
(1) Put the bending portion of the hard disk drive
unit into the inside of the chassis.
(2) Attach the hard disk drive unit with the nine
screws.
(3) Connect the harness to CN1 on the SE-378
board.
(4) Connect the two SCSI connectors and the two
power harness's connectors to each hard disk
drive.
(5) Hold the harnesses with the three harness
holders.
(6) Attach the HDD lid with the two screws.
5. Attach the Bottom Plate
(1) Attach the bottom plate with the six screws.
(2) Gently put the unit back.
5-192
Hard disk drive unit
Screws (B3 x 6)
Screws (B3 x 6)
Screws (B3 x 6)
Bending
portion
SCSI connector
Harness holder
SCSI connector
Harness holder
Screw (B3 x 6)
Screw (B3 x 6)
HDD sub lid
Install the Hard Disk Drive Unit
Screw (B3 x 6)
Harness holder
Power harness's
connector
CN1
SE-378 board
Power harness's connector
DNW-A100/A50/A45
DNW-A100P/A50P/A45P