Sony DNW-A100 Maintenance Manual page 291

10. Cleaning
Clean the mounting surfaces of the reel motor
assembly and reel motor plate.
11. Reel Motor Assembly Installation
(1) Pass the reel motor assembly through the hole
of the reel motor plate in the direction shown
in the figure.
(2) Move the reel motor assembly in the
direction indicated by arrow A and gradually
tighten the three screws.
Tightening torque: 68.6 x 10
{7.0 kgf . cm}
12. Harnesses Connection
Connect the harnesses to CN926 and CN927 on
the RM board.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
< S side >
N . m
_2
< T side >
Screws (PSW3 x 10)
CN927
RM board
CN926
Cleaning
(bottom surface)
Spacers
Cleaning
Reel motor
assembly
A
CN927
Reel Motor Assembly Installation
5-15. Brake Solenoid Replacement
Reel motor
plate
Cleaning
(bottom surface)
Spacers
Cleaning
Reel motor
assembly
A
Screws (PSW3 x 10)
Reel motor plate
CN926
RM board
5-107