Sony DNW-A100 Maintenance Manual page 269

Adjustment
3. Loosen Screws
Loosen the two screws securing the pinch press
assembly by 1/2 to one turn.
4. Adjust the Pinch Press Assembly
Position
Put the pinch solenoid into the energized state,
then insert the tip of a 3 mm flat-blade
screwdriver into the notch of the pinch press
assembly and adjust the pinch press assembly
position so that the specification is satisfied.
5. Tighten Screws
Tighten the two screws loosened in step 3.
Tightening torque: 98 x 10 _2
{10.0 kgf . cm}
6. Recheck the Pinch Press Clearance
Refer to steps 1 and 2.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Pinch press lever
N . m
Pinch press assembly
Iron core
Notch
Pinch limitter
Adjust the Pinch Press Clearance
5-12-2. Pinch Press Clearance Adjustment
Screw
(PSW3 x 8)
5-85