5-18-1. T Drawer Arm Replacement
10. T Drawer Assembly Installation
(1) Clean the mounting surfaces of the T drawer
assembly and chassis.
(2) Set the T drawer assembly and tighten the
two screws.
(3) Connect the harness to the connector of the
tape top sensor.
(4) Fix the harness to the holder of the
adjustment plate.
5-120
T drawer assembly
Connector
Screws
(PWH3 x 8)
Cleaning
Cleaning
T Drawer Assembly Installation
. Fixing the harness
Harness
Cleaning
SE-341 board
Harness
Harness
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Holder