Sony DNW-A100 Maintenance Manual page 240

5-9-3. Cassette Pillar Height Adjustment
Adjustment
4. Loosen Securing Screw
Loosen the set screw of the S or T cassette pillar
by one to two turns.
5. Adjust the Cassette Pillar Height
Lift the cassette pillar and press it slightly against
the lower surface of the cassette reference plate
(L).
Tighten the set screw under this condition.
6. Recheck the Cassette Pillar Height
Check that the height of the S and T cassette
pillars satisfy the specification.
n
Shift the tightening position of the fixing screw
when performing readjustment with the
specification not satisfied. (Do not tighten the
screw in the same position as previous.)
5-56
Cassette pillar
Adjust the Cassette Pillar Height
Set
screw
DNW-A100/A50/A45
DNW-A100P/A50P/A45P