5-31-2. Removal/Installation of Hard Disk Drive
Outline
Replacement
1. Remove the Bottom Plate
2. Remove the Hard Disk Drive
3. Replace the Hard Disk Drive
4. Attach the Hard Disk Drive
5. Attach the Bottom Plate
Preparation
1. Turn the power off and then wait over 30 seconds.
Tools
. Toque screwdriver's bit (+3 mm, l=50 mm): J-6323-430-A
. HDD cushion:
. Shockless toque screwdriver (12 kg.cm):
Removal
1. Remove the Bottom Plate
(1) Place the unit on its right side panel down.
(2) Remove the six screws and the bottom plate.
5-190
J-6530-060-A
J-6530-070-A
Screws (B4 x 6)
Screws (B4 x 6)
Bottom plate
Screws (B4 x 6)
Remove the Bottom Plate
DNW-A100/A50/A45
DNW-A100P/A50P/A45P