5-26. Cleaning Solenoid Replacement
5. Video Head Cleaner Assembly
Installation
(1) Insert the cleaning roller into the clearance
between the height determing plate and full-
erase head as shown in the figure.
(2) Align the two pins of the video head cleaner
assembly with the two holes of the height
determing plate.
(3) Tighten the screw while pushing the video
head cleaner assembly in the direction
indicated by arrow A.
5-168
Screw (PSW3 x 8)
Video head cleaner
assembly
Height
determing
plate
Sensor holder
Video Head Cleaner Assembly Installation
A
DNW-A100/A50/A45
DNW-A100P/A50P/A45P