4-1. DEC-65 Board (BKDW-505/506)
Setting of Unit Side
1. Turn on the power.
2. Set S1100-1 on the SS-63 board to ON (CLOSE) to treat the extended menu.
3. Set the setup extended menu.
. For BKDW-505
Set the ITEM-713 as follows.
ITEM
713: VIDEO SETUP REFERENCE LEVEL
. For BKDW-506
None.
n
The sub mode and menu of the maintenance mode that is used in Section 4-1 is as shown below.
4-4
SS-63 board
SUB-ITEM
0.MASTER LEVEL
1. INPUT LEVEL
2. V BLK REMOVE CNT
3. BETACAM PB LEVEL
4. OUTPUT LEVEL
M0: TAPE MAINTENANCE
C2: AUDIO/VIDEO CHECK
C21: VIDEO TEST SG
C22: MULTI LOOP (10 TIMES)
A2: AUDIO/VIDEO ADJUST
A24: INPUT CF DETECT
A25: DEC VR
A26: DEC VR (LOOP)
A2F: NV-RAM CONTROL
S1100
ON
OFF
Set S1100-1 to ON
Setting
Previous setting (fill up)
0.0 %
MSTER
REMOV
MSTER
MSTER
DNW-A100/A50/A45
DNW-A100P/A50P/A45P