Sony DNW-A100 Maintenance Manual page 280

5-13-3. Fan Motor (HDD) and Fan Motor (MD) Replacement
7. Attach the Fan Motor (HDD)
(1) Put the tips of the fan motor bracket to the
two holes of the chassis shown in the figure.
(2) Attach the fan motor (HDD) with the two
screws.
(3) Connect the harness of the fan motor (HDD)
to the connector.
8. Attach the DR-315 Board
(1) Hook the DR-315 board to the notch of the
chassis shown in the figure.
(2) Fix the DR-315 board with the two screws.
(3) Clamp the harness released in the step 3-(1)
with the harness clamper.
9. Attach the Hard Disk Drive Unit
Attach the hard disk drive unit.
(Refer to Section 5-31-2.)
10. Attach the Bottom Plate
Attach the bottom plate with the six screws.
5-96
Holes of chassis
Screws
(B3 x 6)
Connector
Harness
Fan motor (HDD)
Attach the Fan Motor (HDD)
Screw
(PWH3 x 8)
Screw
(PWH3 x 8)
Attach the DR-315 Board
Notch of chassis
Hook
DR-315
board
Harness clamper
DNW-A100/A50/A45
DNW-A100P/A50P/A45P