Sony DNW-A100 Maintenance Manual page 205

(5) Raise the drum assembly just above and
remove the two harnesses from the harness
holders at the bottom.
n
Be careful not to raise the drum assembly by
holding the brush slip ring assembly.
(6) Disconnect the three harnesses in the state of
step (5). Then the drum assembly can be
removed.
n
Be careful not to touch the AT head and
peripheral tape guides when removing the
drum assembly.
(7) Loosen the hexagonal screw, then remove the
demagnetization head assembly from the
drum assembly.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
http://getMANUAL.com
• Disconnect the connectors
16-pin
22-pin
Hexagonal screw
Demagnetization head assembly
5-3. Drum Assembly Replacement
14-pin
Harness holders
Remove the Drum Assembly
5-21