5-20. Threading Ring and Ring Roller Replacement
20. Pinch Pressure Assembly Installation
(1) Align the notch of the pinch pressure
assembly with the center of the pin of the
chassis, and tighten the two screws.
(2) Connect each harness to the connectors
CN851 and CN854 on the PD-35 board.
5-142
Screw (PSW3 x 8)
Harness
Screw (PSW3 x 8)
Harness
PD-35 board
CN854
CN851
Pinch pressure
assembly
Notch
TC-96 board
. Installing position of the pinch pressure assembly
Notch
Pinch pressure assembly
Pinch Pressure Assembly Installation
Pin
In the center
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Pin