5-12-1. Replacement Procedure of the Pinch Solenoid
3. Remove the PD-35 Board
(1) Remove the screw, then remove the PD-35
board from the pinch press assembly.
(2) Unsolder the three harness soldered on the
PD-35 board.
4. Remove the Pinch Stopper
Remove the two screws and washers, then
remove the pinch stopper.
5-78
Screw (PSW3 x 6)
PD-35 board
Remove the PD-35 Board
Screw (PS3 x 5)
Screw (PS3 x 5)
Washer
Pinch stopper
Remove the Pinch Stopper
PD-35 board
3
1
8
Harness
Washer
DNW-A100/A50/A45
DNW-A100P/A50P/A45P