6. Confirm the Motor Start Option
Confirm that the short plug is connected to each
J2 connector on the newly installed two hard disk
drive units as shown in the figure.
7. Attach the Hard Disk Cover
Attach the hard disk cover with the seven screws.
8. Attach the Hard Disk Drive Unit
Refer to the steps 4 and 5 in Section 5-31-2.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Hard disk cover
2
12
16
1
11
15
Shorting plug
Short the shorting
pin No.11 to the No.12
Attach the Hard Disk Drive Unit
5-31-3. Hard Disk Drive Replacement
Screws
(B3 x 6)
Hard disk drive unit
5-197