Sony DNW-A100 Maintenance Manual page 371

4. Power Supply Block Removal
(1) Remove the two screws (A).
(2) Pull out the power supply block.
Installation
5. Power Supply Block Installation
(1) Remove the four screws (B) and remove the
two PS retainers.
(2) Remove a screw (C) and remove the power
supply shield plate.
(3) Install the two PS retainers to new power
supply block with the four screws (B).
(4) Install the power supply shield plate to new
power supply block with a screw (C).
(5) Install the power supply block with the two
screws (A).
6. Power Supply Panel Assembly
Installation
Install the power supply panel assembly with the
three screws.
n
Be careful not to catch the harness.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
CScrew
(B3 x 6)
Power supply block
PS retainer
Power Supply Block Removal/Installation
Power supply panel assembly
Screws (PS3 x 6)
Power Supply Panel Assembly Installation
5-30. Power Supply Block Replacement
Power supply
shield plate
PS retainer
BScrew
(BVTT3 x 6)
AScrew (PS3 x 6)
BScrew (BVTT3 x 6)
BScrew (BVTT3 x 6)
AScrew (PS3 x 6)
BScrew (BVTT3 x 6)
Screw (PS3 x 6)
5-187