Sony DNW-A100 Maintenance Manual page 380

5-31-3. Hard Disk Drive Replacement
5. Attach the Hard Disk Drives
n
Perform the following jobs with special care not
to apply any shock to the hard disk drives.
(1) Place the two hard disk drives with 6 mm
spacing on the HDD cushion shown in the
figure.
(2) Put the HDD retainer assembly gently on the
two hard disk drives from above, and align
the eight screw holes.
n
Take special care not to contact the TR
retainers of the HDD retainer assembly with
the two hard disk drives.
(3) Install the two hard disk drives to HDD
retainer assembly with the eight unify screws.
Tightening torque: 98 x 10
{10.0 kgf . cm}
(4) Turn the hard disk drive unit downside up on
the HDD cushion.
5-196
HDD retainer assembly
_2 N . m
Unified screws (B 6-32 UNC)
TR retainer
Hard disk drives
Attach the Hard Disk Drive
Unified screws
(B 6-32 UNC)
TR retainer
DNW-A100/A50/A45
DNW-A100P/A50P/A45P