Transmission Installation - Suzuki VLR1800 Service Manual

5B-4 Manual Transmission:
2) Remove the gearshift fork shafts (3) and gearshift
forks (4).
4
3
3) Remove the gearshift cam bearing (5) and gearshift
cam (6).
5
Bearing
Remove the gearshift cam bearing (1) with the special
tools.
Special tool
(A): 09923–74511 (Bearing puller)
(B): 09930–30104 (Rotor remover slide shaft)
(B)
4
3
4
I822H1520007-02
6
I822H1520008-01
(A)
1
I822H1520009-01

Transmission Installation

Install the transmission in the reverse order of removal.
Pay attention to the following points:
Bearing
CAUTION
!
Replace the removed bearing with a new one.
Install the bearing (1) with the special tool.
NOTE
The stamped mark side of the gearshift cam
bearing (1) faces outside.
Special tool
(A): 09913–70210 (Bearing installer set)
Gearshift Cam / Gearshift Fork
• Install the gearshift cam (1) and bearing (2).
B822H15206003
1
(A)
I822H1520010-02
1
2
I822H1520011-01