Suzuki VLR1800 Service Manual page 417

Cylinder bolt
• Install the ring (1) to the damper rod.
• Install the rebound spring (2) to the damper rod (3).
• Apply fork oil to the damper rod ring.
: Fork Oil 99000–99044–10G (SUZUKI FORK
OIL G-10 or equivalent)
• Insert the damper rod (3) into the inner tube.
1
I822H1220017-01
3
2
I822H1220018-01
• Apply thread lock to the damper rod bolt (4) and
tighten it to the specified torque with a 6 mm hexagon
wrench and special tools.
CAUTION
!
Use a new damper rod bolt gasket to prevent
oil leakage.
NOTE
Check the front fork for smoothness by
stroking it after installing the cylinder.
Special tool
(A): 09940–34520 (T handle)
(B): 09940–34531 (Attachment A)
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Front fork damper rod bolt (a): 20 N·m (2.0 kgf-m,
14.5 lb-ft)
Front Suspension: 2B-6
(A)
(B)
I822H1220019-02
4
(a)
I822H1220026-02