Suzuki VLR1800 Service Manual page 288

1D-77 Engine Mechanical:
• Install the pin (5) and oil pump drive gear (6).
5
Primary Driven Gear
• Apply grease to the seal.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Apply thread lock to the primary driven gear bolt.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
• Hold the primary driven gear with the special tool and
tighten its bolt to the specified torque.
Special tool
(A): 09930–44541 (Rotor holder)
Tightening torque
Primary driven gear bolt (a): 95 N·m (9.5 kgf-m,
68.5 lb-ft)
6
I822H1140249-01
I822H1140250-01
I822H1140251-01
(A)
Secondary Drive Gear
• Shift the gear position to 1st or 2nd.
• Hold the primary driven gear with the special tool.
Special tool
(A): 09930–44541 (Rotor holder)
• Apply thread lock to the secondary drive gear bolt and
tighten its bolt to the specified torque.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
Tightening torque
Secondary drive gear bolt (a): 160 N·m (16.0 kgf-
m, 115.5 lb-ft)
(a)
(a)
I822H1140252-01
(A)
I822H1140253-01
I822H1140254-01