1B-1 Emission Control Devices:
Emission Control Devices
Engine
Precautions for Emission Control Devices
Refer to "General Precautions in Section 00 (Page 00-1)".
Fuel Injection System Description
VLR1800 motorcycles are equipped with a fuel injection system for emission level control. This fuel injection system is
precision designed, manufactured and adjusted to comply with the applicable emission limits. With varying engine
conditions, all of the fuel injection volumes are precisely controlled by the programmed injection maps in the ECM to
reduce CO, NOX and HC. Adjusting, interfering with, improper replacement, or resetting of any of the fuel injection
components may adversely affect injection performance and cause the motorcycle to exceed the exhaust emission
level limits.
1. Fuel tank
2. Fuel pump
3. Fuel pressure regulator
4. Fuel delivery pipe
Precautions
General Description
4
5
5. Fuel injector
6. Fuel feed hose
7. Fuel filter (For low pressure)
"A": Before-pressurized fuel
1
3
6
"A"
"B"
"C"
"B": Pressurized fuel
"C": Relieved fuel
B822H11200001
B822H11201001
2
7
I822H1120029-03