Transmission Installation - Suzuki RM-Z450 Owner's Service Manual

TRANSMISSION INSTALLATION

NOTE:
Install the snap ring in the groove and locate its end as shown in
the illustration.
• Apply engine oil to the following parts: driveshaft, counter-
shaft, transmission gears, bearings.
• Install the driveshaft 1 and countershaft 2 with gears
installed.
NOTE:
Install the washers A, B located in both ends of the driveshaft
positively.
TRANSMISSION AND CRANKSHAFT
28.5 mm
(1.12 in)
Thrust
Sharp edge
10-13