Suzuki VLR1800 Service Manual page 293

• Tighten the front cam chain tension No. 1 adjuster
bolts (1) to the specified torque.
Tightening torque
Front cam chain tension No. 1 adjuster bolt (a):
10 N·m (1.0 kgf-m, 7.0 lb-ft)
Front Cam Chain Tensioner No. 1
Apply thread lock to the bolts and tighten it to the
specified torque.
: Thread lock cement 99000–32030 (THREAD
LOCK CEMENT SUPER 1303 or equivalent)
Tightening torque
Front cam chain tensioner No. 1 bolt (a): 18 N·m (
1.8 kgf-m, 13.0 lb-ft)
Front Cam Chain Idler Sprocket
• Engage the cam chain No. 1 (1) and No. 2 (2) onto the
front cam chain idler sprocket (3) and install it to the
upper crankcase.
• Pass the cam chain No. 1 (1) between the front cam
chain idler sprocket (3) and crankshaft (4).
• Align the groove "A" on the front cam chain idler
sprocket with the embossed line "B" on the upper
crankcase.
1
(a)
I822H1140273-01
(a)
I822H1140274-01
2
"A"
• Apply molybdenum oil solution to the idler shaft and
install the idler shaft.
M/O: Molybdenum oil (MOLYBDENUM OIL
SOLUTION)
Engine Mechanical: 1D-82
1
3
"B"
4
I822H1140275-01
"B"
"A"
I822H1140278-01
I822H1140276-01