Suzuki VLR1800 Service Manual page 474

3A-16 Drive Chain / Drive Train / Drive Shaft:
11) Remove the washer (10).
10
12) Remove the inner race with the special tool.
Special tool
(D): 09913–60910 (Bearing remover)
CAUTION
!
When replacing the drive bevel gear, replace
the driven bevel gear also, as they must be
replaced together.
13) Remove the final gear case bolts.
14) Remove the final gear bearing case (11) from the
(D)
I822H1310055-01
15) Remove the shim (12) and final driven bevel gear
(D)
16) Remove the shims (14).
I822H1310056-01
I822H1310057-01
final gear case by using two 5 mm screws.
(13).
11
I822H1310058-01
13
12
I822H1310059-01
14
I822H1310060-01