Suzuki VLR1800 Service Manual page 284

1D-73 Engine Mechanical:
• Apply grease to the O-rings and pass in the oil
pressure regulator (1) to the lower crankcase.
CAUTION
!
Use the new O-rings to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
1
Oil Pan
• Apply bond to the mating surface of the oil pan.
NOTE
• Make surfaces free from moisture, oil, dust
and other foreign materials.
• Spread on surfaces thinly to from an even
layer, and assemble the oil pan within few
minutes.
• Apply to distorted surfaces as it forms a
comparatively thick film.
: Sealant 99000–31110 (SUZUKI BOND
No.1215 or equivalent)
I822H1140356-01
• Tighten the oil pan bolts diagonally.
CAUTION
!
Use the new gasket washers to prevent oil
leakage.
I822H1140357-01
NOTE
• Fit the new gasket washers to the oil pan
bolts "A".
• Fit the clamp "B" and stay "C" to the bolts.
"B"
"B"
"A"
"A"
"A"
I822H1140234-03
"B"
"C"
I822H1140235-01