Suzuki VLR1800 Service Manual page 243

• Hold the piston rings in proper positions, and insert
each of the pistons into the respective cylinders.
• Tighten the cylinder nuts temporarily.
NOTE
The cylinders can be distinguished by the
embossed-letters, "FR" and "RR".
Cylinder Head
• Pull the cam chains out of the cylinders and install the
cam chain guides No. 2 (1).
• Fit the dowel pins and a new cylinder head gaskets
(2) to the cylinders.
I822H1140072-01
Front
I822H1140073-01
Rear
I822H1140074-01
Engine Mechanical:
CAUTION
!
• There is the guide holder for the bottom
end of each cam chain guides No. 2 (1)
cast in the crankcase.
• Be sure that the cam chain guides No. 2 (1)
is installed properly.
• Use a new gasket (2) to prevent gas
leakage.
NOTE
The front cam chain guide No. 2 has the
embossed letters "Front" and the rear cam
chain guide No. 1 has the embossed letters
"Rear".
Front
1
Rear
1D-32
I822H1140075-01
2
I822H1140076-02
1
2
I822H1140077-02