Suzuki VLR1800 Service Manual page 476

3A-18 Drive Chain / Drive Train / Drive Shaft:
• Install the final drive gear bearing into the final gear
case with the special tool.
Special tool
(A): 09913–75821 (Bearing installer)
• Install the oil seal into the final gear case with the
special tool.
Special tool
(B): 09913–76010 (Bearing installer)
CAUTION
!
• Use a new oil seal to prevent oil leakage.
• The lip and spring of the oil seal "A"
should face to the driven bevel gear side.
• Apply grease to the oil seal lip.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
"A"
(A)
I822H1310089-02
(B)
I822H1310068-03
• Install the final driven gear bearing into the final gear
case with the special tool.
Special tool
(C): 09951–16080 (Bearing installer)
NOTE
The stamped mark side of bearing face to the
driven bevel gear side.
• Install a new oil seal to the final gear bearing case
with the special tool.
Special tool
(D): 09951–16310 (Bearing installer)
• Apply grease to the lip of the oil seal.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
(D)
(C)
I822H1310071-02
I822H1310070-02