Suzuki VLR1800 Service Manual page 287

Oil Filter
• Install the oil filter with the special tool. Refer to
"Engine Oil and Filter Replacement in Section 0B
(Page 0B-11)".
Special tool
(A): 09915–40610 (Oil filter wrench)
(A)
Gear Position Switch
• Apply grease to the O-ring.
CAUTION
!
Replace the O-ring with a new one.
NOTE
Align the gear position switch pin "A" with
the gearshift cam hole "B".
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
"A"
I822H1140244-01
"B"
I822H1140245-01
• Install the gear position switch.
NOTE
Be sure to install the grommet "C" to the
lower crankcase.
"C"
Oil Pump Drive Gear / Oil Pump Driven Gear
• Install the washer (1) and pin (2).
NOTE
Be careful not to drop the washer (1) and pin
(2) into the crankcase.
1
• Install the oil pump driven gear (3) and snap ring (4).
NOTE
Never reuse a snap ring.
Special tool
: 09900–06107 (Snap ring pliers)
4
Engine Mechanical: 1D-76
I822H1140246-02
2
I822H1140247-01
3
I822H1140248-01