8) Install the pulley (9) to the shaft (10).
NOTE
Make sure that the shaft's line "A" and cable
slots "B" facing upward as shown.
2
"B"
9) Hold the EXCVA pulley with an adjustable wrench,
and then tighten the pulley mounting bolt (11) to the
specified torque.
Tightening torque
EXCVA pulley mounting bolt (a): 5 N·m (0.5 kgf-
m, 3.5 lb-ft)
CAUTION
!
When loosening or tightening the pulley bolt,
be sure to fix the pulley with an adjustable
wrench, or EXCVA may get damaged.
"A"
1
9
10
I822H11B0012-01
11
(a)
I822H11B0013-01
10) After connecting the No. 2 cable (2), loosen the lock-
nut (12) and turn the adjuster (13) in or until 11 – 12
mm (0.43 – 0.47 in) of the thread length "d" on the
cable adjuster can be provided and tighten the lock-
nut (12).
12
11) Install the EXCVA.
Tightening torque
EXCV cover bolt (b): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
12) Install the removed exterior parts.
Exhaust System:
1K-6
13
2
" d "
I822H11B0014-01
(b)
I822H11B0015-02