Throttle Body Disassembly And Assembly - Suzuki VLR1800 Service Manual

Throttle Body Disassembly and Assembly

Refer to "Throttle Body Removal and Installation
(Page 1D-10)".
Disassembly
CAUTION
!
Identify the position of each removed part.
Organize the parts in their respective groups
so that they can be reinstalled in their
original positions.
1) Disconnect the IAP sensor vacuum hoses (1), ISC
valve hoses (2) and fuel feed hose (3).
1
3
2) Remove the fuel delivery pipe assembly (4).
CAUTION
!
Be careful not to twist the fuel delivery pipe,
when disconnecting the fuel feed hose or
removing the fuel delivery pipe.
B822H11406043
2
1
I822H1140018-01
4
I822H1140019-01
3) Remove the fuel injectors (5) from the fuel delivery
pipe (4).
5
4) Remove the TP sensor (6) and STP sensor (7).
NOTE
Prior to disassembly, mark sensor's original
position with a paint or scribe for accurate
reinstallation.
Special tool
: 09930–11950 (Torx wrench)
CAUTION
!
Never remove the STVA (8) from the throttle
body.
8
Engine Mechanical: 1D-12
4
I822H1140020-01
7
6
I822H1140021-01
I822H1140022-01