Suzuki VLR1800 Service Manual page 289

Gearshift System
• Install the gearshift cam stopper (1), bolt (2), washer
(3) and return spring (4).
• Apply thread lock to the gearshift cam stopper bolt (2)
and tighten it to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
NOTE
Hook the return spring end "A" to the
stopper (1).
Tightening torque
Gearshift cam stopper bolt (a): 10 N·m (1.0 kgf-
m, 7.0 lb-ft)
2
1
• Check the gearshift cam stopper moves smoothly.
• Locate the gearshift cam in the neutral position.
• Install the gearshift cam stopper plate (5).
NOTE
Align the gearshift cam pin "B" with the
gearshift cam stopper plate hole "C".
3
4
I822H1140255-01
"A"
2
(a)
I822H1140256-01
"C"
5
• Apply thread lock to the gearshift cam stopper plate
bolt (6) and tighten it to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Gearshift cam stopper plate bolt (b): 13 N·m (1.3
kgf-m, 9.5 lb-ft)
6
(b)
• Apply thread lock to the gearshift arm stopper (7) and
tighten it to the specified torque.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
Tightening torque
Gearshift arm stopper (c): 19 N·m (1.9 kgf-m, 13.5
lb-ft)
Engine Mechanical: 1D-78
"B"
I822H1140257-01
I822H1140258-01
7
(c)
I822H1140259-01