Side-stand Construction
1. Side-stand
3. Side-stand bolt
2. Spring
4. Side-stand nut
Side-stand Removal and Installation
Removal
1) Support the motorcycle with the jack or wooden block.
2) Remove the side-stand as shown in the side-stand construction. Refer to "Side-stand Construction (Page 9E-3)".
Installation
Install the side-stand as shown in the side-stand construction. Refer to "Side-stand Construction (Page 9E-3)".
3
4
(b)
1
: 50 N⋅m (5.0 kgf-m, 36.0 lb-ft)
: 40 N⋅m (4.0 kgf-m, 29.0 lb-ft)
(a)
2
: Apply grease to sliding surface.
Body Structure:
9E-3
B822H19506005
I822H1950002-02
B822H19506006