Water Pump Disassembly And Assembly - Suzuki VLR1800 Service Manual

• Apply engine coolant to the O-ring.
CAUTION
!
Use a new O-ring to prevent engine coolant
leakage.
• Connect the water hoses securely. Refer to "Water
Hose Routing Diagram (Page 1F-3)".
• Apply thread lock to the water inlet pipe mounting bolt
and tighten its bolt.
: Thread lock cement 99000–32050
(THREAD LOCK CEMENT 1342 or equivalent)
• Pour engine oil and coolant. Refer to "Engine Oil and
Filter Replacement in Section 0B (Page 0B-11)" and
"Cooling System Inspection in Section 0B (Page 0B-
15)".
• Bleed air from the cooling circuit. Refer to "Cooling
System Inspection in Section 0B (Page 0B-15)".

Water Pump Disassembly and Assembly

Refer to "Water Pump Removal and Installation
(Page 1F-12)".
Disassembly
1) Remove the water pump case (1).
I822H1160032-01
2) Remove the O-ring (2).
3) Remove the impeller securing bolt by holding the
impeller with a water pump pliers.
I822H1160031-01
Engine Cooling System:
1
2
1F-13
B822H11606018
I822H1160033-01
I822H1160034-01
I822H1160035-02