Water Pump Disassembly And Assembly - Suzuki GSF650A Service Manual

• Install the water pump assembly with the slot on the
pump shaft end "A" securely engaged with the flat "B"
on the oil pump shaft.
"B"
• Tighten the water pump mounting bolts to the
specified torque.
Tightening torque
Water pump mounting bolt (a): 10 N·m (1.0 kgf-
m, 7.0 lbf-ft)
(a)
• Connect the water hoses securely. Refer to "Water
Hose Routing Diagram (Page 1F-3)".
• Pour engine oil and coolant. Refer to "Engine Oil and
Filter Replacement in Section 0B (Page 0B-12)" and
"Cooling System Inspection in Section 0B (Page 0B-
14)".
• Bleed air from the cooling circuit. Refer to "Cooling
System Inspection in Section 0B (Page 0B-14)".
"A"
I717H1160024-01
I717H1160025-01
Engine Cooling System:

Water Pump Disassembly and Assembly

Refer to "Water Pump Removal and Installation
(Page 1F-12)".
Disassembly
1) Remove the air rent bolt (1) if necessary.
2) Remove the water pump case (2).
3) Remove the O-ring (3).
4) Remove the impeller securing bolt by holding the
impeller with a water pump pliers.
5) Remove the mechanical seal ring (4) and rubber
seal (5) from the impeller (3).
5
4
1F-13
B817H21606018
1
2
I718H1160054-01
3
I718H1160012-01
3
I718H1160013-01