Modifying Virtual Switch Ports - Avaya P550R User Manual

Modifying Virtual Switch Ports

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
To modify virtual switch ports:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 64).
2. Click the number of the switch port in the Switch Ports
column of the ATM Uplink module you want to modify the
virtual switch ports for. The Switch Ports dialog box opens
(Figure 65).
3. Click Manage Virtual Switch Ports. The Virtual Switch
Ports dialog box opens
* Note: You may have to scroll down to see the Manage
Virtual Switch Ports link.
4. Select the ID of the virtual switch port you want to modify.
5. Click Modify. The Modify Virtual Switch Port dialog box
opens (Figure 76
on).
* Notes:
• Make sure you enter the PVC you have created to use
on this link in the Default PVC field.
• If Packet Replication is turned on, then the Default
PVC is not displayed. Rather, each ATM Link within
the VSP contains its own Default PVC. You will can
change the Default PVC for each ATM Link from the
Modify ATM Link page.
(Figure 66).
or Figure 77 if Packet Replication is turned
Configuring RFC 1483
4-15