Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
* Notes:
•
The Create PVC dialog box may vary slightly,
depending on the PVC traffic class set you chose to
create.
•
The traffic class should be the same on both VSPs.
g. Refer to
Table 88
create your PVC class set.
* Note: The virtual path identifier (VPI) and virtual
circuit identifier (VCI) must be the same on both
VSPs.
Table 88. PVC Parameters
Parameter
Physical Port
VPI
VCI
Inbound Priority Map
Configuring RFC 1483
for an explanation of the parameters to
Definition
Enter the Physical Port number.
Enter the VPI. The valid range is 0 - 255.
Enter the VCI number. The valid range is
32 - 65535.
Enter the priority to be assigned to frames
received on this PVC as they are passed
onto the local VLAN segment. The valid
range is
0 - 7.
4-39