Setting The Default Pvc - Avaya P550R User Manual

Chapter 4
Setting the
Default PVC
4-42
c. Select Manage Virtual Switch Ports. The Virtual
Switch Ports dialog box opens.
* Note: You may have to scroll down to see the Manage
Virtual Switch Ports link.
d. Select Manage Links from the ATM Links column of the
virtual switch port link you want to modify. The ATM
Link for Virtual Switch Port <#> dialog box opens.
e. Select the ATM Link in the Name column of the ATM
Link for Virtual Switch port <#> you want to modify.
f. Select Modify. The Modify ATM Link <name> for
Virtual Switch Port <#> dialog box opens.
* Note: The Default Channel field does not appear for
Non-Packet Replicating VSPs.
g. Select Disable from the "Administrative Status" pull-down
menu.
h. Select the Outbound Priority from each of the"
Outbound Priority" pull-down menus.
* Notes:
• It is recommended that you select a priority level. If
you select None, the frames tagged at that priority
level will be dropped without notification.
• You can modify the Name, Default Channel, and Fail
Over ATM Link parameters, if necessary.
i. Click APPLY to save changes, or CANCEL to restore the
previous settings.
j. Select Enable from the "Administrative Status" pull-down
menu.
k. Click APPLY to save changes, or CANCEL to restore the
previous settings.
5. To set the default PVC on the VSP:
a. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens.
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.