Avaya P550R User Manual page 142

Chapter 4
4-52
e. Select Manage PVCs in the PVCs column for the ATM
Link you want to manage the PVCs for. The PVCs for
ATM Link <xxx> dialog box opens.
f. Select one of the following:
• Create UBR
• Create CBR
• Create rtVBR
• Create nrtVBR
The Create PVC for ATM Link <xxx> dialog box opens.
* Notes:
• You cannot use the UBR traffic class if you are
enabling Packet Replication.
• The Create PVC dialog box may vary slightly,
depending on the PVC traffic class set you created.
g. Refer to Table 88
create a PVC class set.
h. Click APPLY to save your changes or CANCEL to exit the
Create PVC dialog box without saving changes.
i. Return to the PVCs for ATM Link <xxx> dialog box and
repeat steps f-h for the second PVC.
* Note: You must use the same traffic class for both
PVCs.
4. Enable the ATM links.
a. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens.
b. Select the switch port number for which you want to
modify the ATM links from the Switch Ports column for
the specific ATM Uplink Module. The Switch Ports dialog
box opens.
c. Select Manage Virtual Switch Ports. The Virtual
Switch Ports dialog box opens.
* Note: You may have to scroll down to see the Manage
Virtual Switch Ports link.
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
for an explanation of the parameters to