Avaya P550R User Manual page 114

Chapter 4
4-24
2. Click the number of the switch port in the Switch Ports
column of the ATM Uplink module you want to manage PVCs
on. The Switch Ports dialog box opens
3. Click Manage Virtual Switch Ports. The Virtual Switch
Ports dialog box opens
* Note: You may have to scroll down to see the Manage
Virtual Switch Ports link.
4. Click Manage Links in the ATM Links column of the virtual
switch port you want to manage. The ATM Link for Virtual
Switch Port <#> dialog box opens
5. Click Manage PVCs in the PVCs column for the ATM Link
you want to manage the PVCs for. The PVCs for ATM Link
<xxx> dialog box opens
Figure 81. PVCs for ATM Link <xxx> Dialog Box
6. Complete one of the following:
* Note: You must disable the ATM Link Admin Status to
create, delete, or modify PVCs. After changing
the parameters, change the ATM Link Admin
Status state to Enabled in order for the changes
to take effect.
Click DELETE to remove the selected PVC. The Delete
—
PVC dialog box opens. Refer to Deleting Permanent
Virtual Channels, later in this chapter.
Click MODIFY to change the selected PVC. Refer to
—
Modifying Permanent Virtual Channels, later in this
chapter.
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
(Figure
(Figure 66).
(Figure 78).
(Figure 81).
65).