Replicating Vsp Example - Avaya P550R User Manual

Chapter 4
Replicating VSP
Example
Site 1
Engineering
VLAN
Engineering
4-4
If a site had three buildings (or more), each site would configure a
Replicating VSP. Building on the Non-Replicating VSP example
above, suppose there were three buildings with the "Engineering"
VLAN. Each of the three sites would create a Replicating VSP called
"Engineering". Each site would also configure two ATM Links and
within those two links, define PVCs.
Eng_Site_2
VSP
ATM Network
Eng_Site_3
Site 3
Engineering
VLAN
Site 1 would create VSP "Engineering" with ATM Links
"Eng_Site_2" and "Eng_Site_3".
Site 2 would create VSP "Engineering" with ATM Links
"Eng_Site_1" and "Eng_Site_3".
Site 3 would create VSP "Engineering" with ATM Links
"Eng_Site_1" and "Eng_Site_2".
All three sites would bind their Engineering VSP to the Engineering
VLAN.
For more information on RFC 1483, refer to
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
Eng_Site_1
Engineering
Eng_Site_3
Eng_Site_1 Eng_Site_2
VSP
Engineering
Site 2
Engineering
VSP
VLAN
RFC 1483 in Chapter 1.