Avaya P550R User Manual page 48

Chapter 3
3-6
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
7. Click APPLY to save your changes or CANCEL to restore the
previous settings.
Table 24. Virtual Port Configuration Parameters
Parameter
Name
Physical Port
VPI
Administrative
Status
Max VCI
Definition
Enter a user-assigned name for this port.
For example, a drop name or the name of
the station or other device connected to
the port.
Select the physical port that this virtual
port resides on.
Enter the Virtual Path Identifier (VPI) for
the virtual port. Valid ranges are 0 - 255.
Select the administrative status of the
port. Options include:
• Up - The desired operational state.
• Down - Forces port down.
Default is Up.
Note:
In order to make changes to a
Virtual Port, the Port must be set
to the Down state.
Enter the maximum number of VCIs
(Virtual Channel Identifier) used by this
port. The minimum number is 32;
maximum number is 32767 across all
virtual ports on a given physical port. This
value is based on the switch
configuration.