Configuring Lec Switch Port Parameters - Avaya P550R User Manual

Chapter 3

Configuring LEC Switch Port Parameters

3-40
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
Table 53. Priority Mapping Parameters
Parameter Description
Priority This is the Ethernet priority value. For each value (0 -
7), this table indicates which VP/VC will forward
Ethernet frames tagged with this priority.
Borrowed Bit Displays the status of the borrowed bit. This indicates
that this priority of traffic can "Borrow" or is
"Borrowing" bandwidth from another (lower)
priority VC. If the number of Frames sent at this
priority exceeds the Maximum Unknown Frame
count (configured for the LEC), the LEC will create a
Data Direct VC for this priority of traffic instead of
forwarding the Frames down the "Borrowed" VC.
Status can be either:
Channel ID Displays the Channel ID, which is the handle of the
internal channel.
VPI Displays the virtual path indicator.
VCI Displays the virtual circuit indicator.
Link The link to a channel's counters.
To configure LEC switch port parameters:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 18).
2. Click the number in the Switch Ports column for the ATM
Uplink module you want to configure LEC switch ports on.
The Switch Ports dialog box opens (Figure 37).
3. Click the name in the Port VLAN column for the port you
want to configure. The Switch Port Configuration dialog box
opens (Figure 54).
• Clear
• Set