Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
Figure 9. ATM Physical Ports Dialog Box
3. Select the port ID you want to modify.
4. Use
Table 10
to modify your ATM physical ports:
Table 10. Module # ATM Physical Ports Dialog Box Parameters
Parameter
Definition
ID
The ATM physical port ID number.
Name
Enter the ATM physical port name. The name can
be up to 32 characters. You must set the
Administrative Status to Down before changing
the Name.
Number
The ATM physical port number. The first number
is the slot number in the chassis. The second
number is the physical port number 1 or 2.
Line Type
The line type. Types include:
Medium Type
Select the medium type from the pull-down
menu. Types include:
Note:
Path Width
Indicates whether the port is OC12(STS12c) or
OC3(STS3c).
Maximum
The maximum bandwidth in bits per seconds
Bandwidth (bps)
(bps).
Configuring the ATM Uplink Module
• Multi-Mode Fiber (MMF)
• Single-Mode Fiber (SMF)
• SONET - USA
• SDH - International
The port must be administratively
(forced) down to modify this setting.
2-11