Avaya P550R User Manual page 112

Chapter 4
4-22
Table 80. ATM LInk for Virtual Switch Port Parameters
Parameter
Name
Administrative
Status
Default Channel
Fail Over ATM
Link
OAM Loopback
Outbound
Priority
8. Click APPLY to save changes, or CANCEL to restore the
previous settings.
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
Description
Enter the user-defined name for the ATM Link.
(1 - 31 character)
Select the administrative status of the port.
Options include:
• Enabled - The ATM desired operational
status.
• Disabled - Forces port down.
This parameter will not be present if the VSP is
Non-Replicating.
Select the Default Channel for packet
replicating VSPs from the pull-down menu.
Note:
Do not use a UBR PVC.
Type in the exact name of the ATM Link that
will forward traffic in the event this link fails. If
LoadShare is Yes, the ATM Uplink module will
balance unicast traffic over this link and the
FailOver link.
Enter none if you want to disable the
FailOver/LoadShare feature on this ATM Link.
Note:
The Failover Link should list this link
as the Failover. In other words, they
should point to each other as the
Failover Link.
Selects whether OAM cells are transmitted on
this ATM Link. Options include:
• Enabled - Use OAM cells for checking
link integrity
• Disabled
Select the outbound priority from the pull-
down menu.
Note:
It is recommended that you select a
priority level. If you select None, the
Priority Level will be dropped without
notification.